November 2026 · Quooker taps, tanks, sinks & installation in Ireland

Boiling-Water Taps, Specified Properly

An Irish trade reference for specifying a Quooker: how the price is built up, which tank suits which home, model-specific finishes, tap holes, sink choice and the services to plan before fitting.

Light Hardware Supplies · Kilkeary, Nenagh, Co. Tipperary, Ireland
Web commentary reviewed · Original editions retain their publication month.

Before fabrication or ordering

The coordinated kitchen specification

A planning checklist, not a fabrication drawing or installation manual. Record the actual chosen variant at each stage.

  1. 01Tap model and shape (round or square)
  2. 02Finish confirmed for that exact model
  3. 03Tank: PRO3, COMBI or COMBI+, chosen from the home's hot-water situation
  4. 04CUBE wanted? Check cupboard space and installation height
  5. 05Sink model, mounting method and tap-hole diameter
  6. 06Worktop approved for that sink mounting method
  7. 0713 A earthed socket below the sink
  8. 08Cold-water pressure of at least 2 bar
  9. 09Water and power within 50 cm, or the correct extension kit
  10. 10Scale Control R for hard-water areas

Edition context & specification answers

The answers below provide the edition’s specification guidance and evidence. They distinguish design recommendations from substantiated market evidence.

What does the November Market Brief cover?

This edition is a specification reference for boiling-water taps, built around the Quooker range LHS supplies. It explains how a complete system is made up, the questions that decide the tank, and the sink, worktop and service checks that prevent problems on fitting day. It is guidance, not an installation manual.

Why focus on boiling-water taps now?

LHS receives regular enquiries about Quooker pricing and suitability, and those questions are usually about the whole system rather than the tap alone. Answering them clearly in one place helps kitchen makers quote accurately and helps homeowners arrive with the right information.

Browse the LHS Quooker range

How much is a Quooker tap in Ireland?

There is no single price because a Quooker is a system: the tap, a tank under the sink and, optionally, a CUBE for chilled and sparkling water. The tap model, finish, tank type and accessories all change the total. LHS does not publish prices online; send the model, finish and tank you are considering and the trade team will quote the complete system.

Ask LHS for a Quooker quote

Where can I buy a Quooker in Ireland?

Light Hardware Supplies supplies the Quooker range — Flex, Fusion, Classic Fusion, Front, Nordic Single tap and Twintaps, the PRO3, COMBI and COMBI+ tanks and the CUBE — from Kilkeary, Nenagh, Co. Tipperary, with delivery nationwide. Trade customers order through the Cin7 B2B portal; anyone can send an enquiry through the contact form.

See Quooker taps, tanks and the CUBE

Which Quooker tank do I need?

Start with the home's hot water. With no hot-water supply, or more than six metres from boiler to kitchen tap, choose the COMBI. If hot water already arrives quickly, the PRO3 boiling-water tank suits. If hot water takes a long time to arrive, the COMBI+ gives instant boiling and unlimited hot water.

Compare PRO3, COMBI and COMBI+

Can every Quooker tap be ordered in every finish?

No. Finish availability is model-specific. LHS lists Flex in polished chrome, stainless steel, black, gunmetal and rose copper; Classic Fusion lists polished chrome, stainless steel and patinated brass. A finish shown for one model is not proof it exists for another, so confirm the exact tap and finish together before ordering.

Check finishes for each Quooker model

Will a Quooker tank fit under the sink?

Check the installation height inside the cupboard. The PRO3 needs 550 mm; the COMBI, COMBI+ and CUBE need 580 mm. If the sink cupboard is full, a mounting bracket lets the PRO3, COMBI or COMBI+ go on the wall, and extension kits from 30 cm to 150 cm allow the tank further from the tap.

Quooker installation heights and accessories

What size tap hole does a Quooker need?

Quooker taps need a Ø35 mm tap hole, except the Nordic Single tap, which needs Ø32 mm. Confirm the sink or worktop cut-out before fabrication; a pre-drilled sink hole of a different size is not a reliable fit.

Compare sinks for a Quooker

Which sink suits a Quooker tap?

Quooker taps work with inset, undermount and ceramic sinks, so the worktop usually decides. Mica Post states that its Leading Edge and postformed laminate worktops suit insert sinks only, not undermount or Belfast sinks. Choose the worktop and sink mounting method together before approving the cut-out.

Read Mica Post's sink suitability notice

What services are needed before fitting a Quooker?

Quooker Ireland's installation criteria specify a 13 A earthed socket below the sink, at least 2 bar cold-water pressure, and water and power within 50 cm of the installation position, with extension kits for longer distances. Follow the selected system's current instructions and use a competent installer.

Quooker Ireland installation criteria

Is a Quooker safe in a family kitchen?

Boiling water needs a push-push-turn action, the tap is double-walled and insulated, and the light ring glows red while boiling water pours. On the Flex, boiling water switches off as soon as the hose is pulled out. Explain these features at handover so every user knows how the tap works.

What does the Quooker CUBE add?

The CUBE adds filtered, chilled, still and sparkling water through compatible Quooker taps. It sits in the cupboard alongside the tank, so check installation height and space before promising it; a CUBE extension kit can move it further from the tank.

See the Quooker CUBE

Should I add scale protection in hard-water areas?

Scale Control R is listed for the PRO3, COMBI and COMBI+ tanks to extend tank life and improve taste, especially in hard-water areas. Check the local water before deciding, and record it on the specification so it is not missed at ordering.

Where can Irish kitchen makers check LHS Quooker details?

Light Hardware Supplies is based at Kilkeary, Nenagh, Co. Tipperary, E45 F227. The LHS Quooker page lists the taps, tanks, CUBE and accessories supplied. Call 067 31471 or email sales@lhs.ie to confirm a model, finish or compatibility question. No live stock or trade prices are published in this brief.

Talk to the Light Hardware Supplies trade team

Source register

Official evidence and manufacturer guidance supporting this edition; checked 18 October 2026.

Quooker Ireland — Installation criteria LHS — Quooker taps, tanks and CUBE Mica Post — Leading Edge sizes and sink restrictions
Ask Sean